Low Frequency Oscillator (Lfo); Waveform/Speed/Delay/Phase - Yamaha SY55 Product Manual

Wave
Summary: Determines the waveform of the LFO
for the selected element.
Settings: tri, dwn, up, squ, sin, S/H
Procedure: If the Wave parameter is not already
selected, use the
lect it. Use the [DATA ENTRY] control or [+1/
YES] and [-1/NO] keys to select the desired LFO
waveform.
Speed
Summary: Sets the speed of the LFO for the se-
lected element.
Settings: 0 ... 99
Procedure: Use the
select the Speed parameter. Use the [DATA EN-
Delay
Summary: Sets the delay time between the begin-
ning of a note and the beginning of LFO opera-
tion for the selected element.
Settings: 0 ... 99
Procedure: Use the
select the Delay parameter. Use the [DATA EN-

LOW FREQUENCY OSCILLATOR (LFO)

WAVEFORM/SPEED/DELAY/PHASE

and cursor keys to se-
and cursor keys to
and cursor keys to
Details:
"tri" = Triangle.
"dwn" = Downward sawtooth.
"up" = Upward sawtooth.
"squ" = Square.
"sin" = Sine.
"S/H" = Sample and hold.
Refer to: "SENSITIVITY (VELOCITY, AMPLI-
TUDE & PITCH MODULATION," page 67.
TRY] control, [-1/NO] and [+1/YES] keys, or
numeric and [ENTER] keys to set the desired
LFO speed.
Details: "0" produces the slowest LFO speed, and
"99" produces the fastest LFO speed.
Refer to: "SENSITIVITY (VELOCITY, AMPLI-
TUDE & PITCH MODULATION," page 67.
TRY] control, [-1/NO] and [+1/YES] keys, or
numeric and [ENTER] keys to set the desired LFO
delay.
Details: The minimum setting of "0" results in no
delay, while the maximum setting of "99" pro-
duces the longest possible delay before the LFO
begins operation.
Refer to: "SENSITIVITY (VELOCITY, AMPLI-
TUDE & PITCH MODULATION," page 67.
VOICE EDIT MODE
JOB 1 8
69