Error! No text of specified style in document. Error! No text of specified style in document.
Replacement Procedures
4.7
Logic Upper Assembly
Removing the Logic Upper Assembly
Remove the logic upper assembly according to the following procedures and Figures 4-10 and
4-11.
1. Turn the laptop upside down.
2. Remove the M2.5×6 (for H7 model: seventeen screws and for H95 model: nineteen
screws---two more red mark screws) and one M2.0×4 screws securing the logic upper
assembly.
3. Disconnect the speaker cable (mark a in Figure), backlight cable (depend on model) (mark
b in Figure), keyboard FFC (mark c in Figure) and TPC FFC (mark d in Figure) from the
connector on the motherboard
M2.5×6*17
Figure 4-10 Removing screws from the bottom of the laptop
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual
M2.0×4
4
4-21