Error! No text of specified style in document. Error! No text of specified style in document.
Replacement Procedures
4.4
HDD
Removing the HDD
Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4-5
and 4-6.
CAUTION: This is push bar for Assemble HDD. Do not press on the top
or bottom of the drive. Applying such pressure can either corrupt the
data in the drive or damage the drive.
1. For H95 model: Remove two M2.5×6 screws securing the HDD door. Pry up the HDD
door from the recess area (as the arrow shown in figure) and remove it.
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual
M2.5×6*2
4
H95 model
4-13