Error! No text of specified style in document. Error! No text of specified style in document.
Replacement Procedures
4.6
WLAN Card
Removing the WLAN Card
Remove the WLAN card according to the following procedures and Figure 4-9.
1. Disconnect the two antenna cables from the WLAN card.
2. Remove the two M2×3 screws securing the WLAN card, the WLAN card pops up
automatically.
3. Remove the WLAN card at an angle of 45 degree.
M2×3*2
Installing the WLAN Card
Install the WLAN card according to the following procedures:
1. Insert the WLAN card into the connector on the motherboard at an angle of 45 degree.
2. Press the WLAN card down and secure it with two M2×3 screws.
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual
Figure 4-9 Removing the WLAN Card
4
4-19