Inserting Two Size Aa (R6) Batteries Into The Remote; Setting Up The Speakers For Dolby Pro Logic - Sony LBT-XGR90AV Operating Instructions Manual

Inserting two size AA (R6)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting up the speakers
for Dolby Pro Logic
Dolby Pro Logic Surround improves the sound
image by using four separate channels. These
channels manipulate the sound to enhance the
action as it happens on the screen.
Since the center speaker cannot produce
enough bass, the bass sound of the center
channel is output from the front speakers.
Center speaker
Front speaker
(L)
Rear
speaker
(L)
GB
8
Positioning the center and
rear speakers
1
Front
speaker
(L)
Rear
speaker
(L)
2
3
Front speaker
(R)
Rear
speaker
(R)
Place the front speakers at an angle of
45 degrees from your listening
position.
Center speaker
45
Place the center speaker so it is placed
at about the same height as the front
speakers. Align the center speaker with
the front speakers or place it a little
behind the front speakers' position.
Place the rear speakers facing each
other at about 60 to 90 cm above your
listening position.
60 to 90 cm
Front
speaker
(R)
Rear
speaker
(R)
Rear speaker