Messages - Sony LBT-XGR90AV Operating Instructions Manual

Table of Contents

Advertisement

Problems and remedies (continued)
CD Player
The CD tray does not close.
• The CD is not placed properly.
The CD will not play.
• The CD is not lying flat in the disc tray.
• The CD is dirty (see "Notes on CDs " on page
31).
• The CD is inserted label side down.
• The CD is moist.
Play does not start from the first track.
• The player is in program or shuffle mode. Press
PLAY MODE repeatedly until "PROGRAM,"
"ALL DISCS SHUFFLE," or "1 DISC
SHUFFLE" disappears.
Tape Deck
The tape does not record.
• The tab has been removed from the cassette (see
"To save a tape permanently" on page 32).
• The tape has reeled to the end.
The tape does not record nor play, or there is a
decrease in sound level.
• The heads are dirty (see "Cleaning the tape
heads" on page 32).
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 32).
The tape does not erase completely.
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 32).
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty (see
"Cleaning the tape heads" on page 32).
Noise increases or the high frequencies are erased.
• The record/playback heads are magnetized (see
"Demagnetizing the tape heads" on page 32).
GB
30
Tuner
Severe hum or noise ("TUNED" or "STEREO"
flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect the
external antenna.
A stereo FM program cannot be received in stereo.
• Press STEREO/MONO so that "STEREO"
disappears.
If other troubles not described above
occur, reset the system as follows:
1
Press c/CLOCK SET, TUNER ENTER
and ?/1 at the same time.
2
Unplug the power cord.
3
Plug the power cord back in.
4
Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings you made are cleared.

Messages

CD
NO STEP
You have cleared all the tracks you programed.
OVER
You have reached the end of the CD. Press m.
STEP FULL
You tried to program 26 or more tracks (steps).

Advertisement

Table of Contents
loading

Table of Contents