Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the battery.
Procedure
1
Remove the screws that secure the I/O board to the palm-rest assembly.
2
Peel off the tape that secures the display cable to the I/O board.
3
Disconnect the media-card reader cable from the I/O board.
46
computer. After working inside your
base
cover.
After working inside your