Exhaust System; Muffler Removal/Installation - Honda 2010 CRF250R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
Align the air cleaner connecting boot band hole with the
lab of the air cleaner connecting boot.
Tighten the air cleaner connecting boot band screw to
the specified width as shown.
Install the following:
- Muffler (page 2-9)
- Side covers (page 2-3)
Seat (page 2-3)
EXHAUST SYSTEM
MUFFLER REMOVAL/INSTALLATION
Remove the right side cover (page 2-3).
Loosen the muffler jOint band bolt.
3.0- 6.0 mm
{O.12-0.24 in)
3.0 -6.0 mm
(0.12-0.24
in)
Remove the muffler mounting bolts, washers, muffler.
~~~~~i~~~~i5~~li~
gasket and muffler jOint band.
r
2-9