Cam Chain Tensioner; Cam Chain Tensioner Lifter - Honda 2010 CRF250R Service Manual

Install the cam chain tensioner lifter bolt with a new
sealing washer.
Tighten the cam chain tensioner lifter bolt securely.
CYLINDER HEADNALVES
" 0 shown :
Apply engine oil to a new O-ring , and install it to the
;~~~~~~~~=~;:;;~;;~.;;;~
crankshaft hole cap.
Apply grease to the crankshaft hole cap threads.
Install the crankshaft hole cap and tighten it to the
specified torque.
TORQUE : 15 N'm (1.5 kgf'm, 11 IbHt)
Afrer
'12
only:
Instalilhe condenser (page 16-16).
Install the cylinder head cover (page 8-8).
CAM CHAIN TENSIONER
CAM CHAIN TENSIONER LIFTER
REMOVAL
After
'12
only:
Remove the condenser (page 16-16).
Remove the cam chain tensioner lifter bolt and sealing
washer,
Insert the cam chain tensioner holder into the cam
::==:::~~ ~~ii~~~~~~§~~
chain tensioner lifter. ,:
Tum the cam chain tensioner holder clockwise fully and
lock the cam chain tensioner lifter by pushing the
handle.
TOOL:
Cam chain tensioner holder 070MG-0010100or
07AMG-001A100
(U.S.A. only)
Remove the bolts, cam chain tensioner lifter and
gasket.
8·35