Quick Troubleshooting - Dish TV satBox S8200 User Manual

Quick Troubleshooting

Problem
Power Indicator on
front panel not lit.
No picture on TV
Tuning Failed or
Database Empty
Remote Control is
not responding /
working
Picture is distorted
either too wide or
narrow and image
cuts off.
Possible Causes
Main Lead unplugged/
switched off
Your TV isn't able to display the
current output format
• Dish cable not plugged in
• Satellite Dish may be
misaligned
No batteries or batteries incorrect-
ly inserted into the back of the
remote
Batteries are flat
The Infrared receiver on the S8200
receiver is obstructed (Front panel
blocked by objects)
The TV ratio has been incorrectly
set
What to do
Check that the adapt-
er is plugged in and
switched on.
Check to see if your TV is set
to the current source.
Go to Menu > Settings >
System Settings
Adjust the resolution to suit
the TV, sometimes HDMI ca-
bles can't provide a 1080p
picture to your TV.
Plug in the Satellite Dish
cable into the top right SAT
IN socket at the back of the
receiver.
Align the Dish to the correct
Freeview Satellite (OPTUS
D1) ensure that there are no
objects that could interrupt
the signal path.
Insert the supplied 2x AAA
Batteries into the back of
the remote.
Replace batteries with new
ones.
Check that there is a clear
line of sight between the
front panel and your remote
control, move objects if
necessary.
Go to Menu>Settings>Sys-
tem Settings and adjust the
Aspect Ratio settings.
55