Dish TV satBox S8200 User Manual page 11

Installation Setup
1. Choose your Internet connection
type by selecting either Wireless
(if you have a wireless router) or
Wired (if you have a Ethernet cable
connected)
If you have no access to the
Internet, simply press the green
button to skip and begin scanning
for Freeview channels. You can
always setup internet connectivity
later on if you wish.
2. Wait for the unit to scan for all
available channels, the amount
of channels vary between areas
which may take a few minutes to
tune in.
If you need to stop the tuning
process at any time, press the red
button.
No Channels?
Check for the following:
• Using a Dish, not an aerial?
• Dish aligned properly?
• Transmission Issues in your area?
11