Software Upgrade; Manual Update - Dish TV satBox S8200 User Manual

Software Upgrade

Manual Update

Check for the latest updates manually
either over the Air (Freeview Broadcast),
Internet or a USB drive.
Update over the Network
Toggle so that NETWORK is selected
1.
as the update method.
2. Enter in your 4 digit PIN.
3. Please wait for the update to be
downloaded to the device then
installed, this may take up to 5
minutes.
Update over USB
1. Go to dishtv.co.nz/support/
downloads to download the
corresponding firmware package.
The file package will be a ZIP file
which will need to be extracted
and moved to a USB device that
you use to plug into the S8200 unit.
2. Plug in the USB on of the S8200
ports, either at the front or the rear.
3. A message may appear on screen
asking you about a new update,
you can proceed from there or
alternatively you can access Menu
> Manual Update then select USB
as the method.
4. Wait up to 5 minutes for the
software to download.
42