Brother P-touch RL-700S User Manual page 17

5
Close the cover.
6
Press the ON/OFF button.
The ON/OFF button lights up in blue.
Memo
If the cover is not properly closed or the tape
cassette is not properly set, the ERROR lamp
lights up. Repeat from Step 3 onwards.
7
Press the Feed and Cut button.
This procedure removes any slack in the tape cassette.
Memo
This step is not necessary for SZ tapes.
Caution
If you do not use the machine for 10 minutes, the machine will release the roller holder. If you
disconnect the machine from the power before this happens (without turning the machine off with
the ON/OFF button first) the tape cassette may be locked inside the printer. Please make sure you
turn the machine off using the ON/OFF button before disconnecting the AC adapter.
Before printing labels
ON/OFF button
Feed and Cut button
17