Adjusting The Volume; Using Mirrorlink Mode; Using The Touch Panel Keys (App Control Side Bar); Starting Procedure - Pioneer AVH-X8750BT Owner's Manual

Chapter
4 Touch the item you want to set.
15
Left (default):
Select for a left-hand drive vehicle.
Right:
Select for a right-hand drive vehicle.
The setting will be applied the next time an
Android Auto-compatible device is con-
nected to this product.

■ Adjusting the volume

You can adjust the guidance volume/alert
sound volume separately from the main
sound volume when Android Auto is used.
Touch the VOL (+/–) button.
1 2
1 Touch to mute. Touch again to unmute.
2 Displays the main sound volume.
3 Adjusts the guidance volume/alert sound
volume.
Each touch of [+] or [–] increases or
decreases the volume level.
p You cannot adjust the volume of the main
sound on the screen. Touch the VOL
(+/–) button to adjust the volume of the
main sound.
p The volume menu is displayed for four
seconds. If the screen disappears, touch
the VOL (+/–) button again. The screen
reappears.

Using MirrorLink mode

When you connect a MirrorLink device
with compatible applications installed,
you can control the applications for the
mobile device directly from this product
(MirrorLink mode).
You can view and operate the compatible
applications via the display with multi-touch
gestures like tapping, dragging, scrolling,
and flicking.
p Multi-touch gestures may be disabled
depending on the MirrorLink device that
is connected.
38
En
■ Using the touch panel keys (App
control side bar)
1
2
3
4
5
6
1 Displays the source list.
For details, refer to Selecting a front
source on the source list on page 11.
2 Displays the launcher application
screen.
3 Displays the previous screen.
p Depending on the type of MirrorLink
device, this key is not available.
3
4 Displays the menu screen.
p Depending on the type of MirrorLink
device, this key is not available.
5 Displays the Phone menu screen.
For details, refer to Displaying the phone
menu on page 14.
6 Displays the current source.
p In MirrorLink mode, App control side bar
will appear.
p If you press the HOME button twice, the
App control side bar will disappear. Press
the HOME button twice again, and the
App control side bar will appear.

■ Starting procedure

When connecting a MirrorLink device to
this product, you must select the method
for connecting your device. Settings are
required according to the connected device.
For details, refer to Chapter 5.
1 Unlock your MirrorLink device.
2 Connect your MirrorLink device to
this product via the separately sold
USB interface cable for use with
MirrorLink devices (CD-MU200).
For details, refer to Connecting the
Android or MirrorLink™ device on
page 65.
3 Press the HOME button to display
the Top menu screen.
4 Touch [APPS].
If the launcher application is installed in
the MirrorLink device, the application
launches.
If not, the Application menu screen will
appear.
5 Touch the desired application icon.
The desired application is launched, and the
application operation screen appears.
p Some applications may not launch
depending on the state of the connected
device. If it does not launch, launch the
application according to the application
startup message.
6 Operate the application.
7 Press the HOME button to go back
to the Top menu screen.

Using the audio mix function

You can output audio mixing AV source and
an application for iPhone or smartphone
when the AppRadio Mode or MirrorLink
mode is used.
1 Start up the AppRadio Mode or
MirrorLink mode.
2 Press the VOL (+/–) button.
The audio mix menu will be displayed on the
screen.
1 2 3
1 Touch to mute. Touch again to unmute.
2 Sets whether to switch the sound mix
function on or off.
Left tab: The audio mix function is
enabled (mix on). The App volume is
displayed. If you touch the App volume,
the volume keys will be displayed.
Right tab: The audio mix function is
disabled (mix off).
3 Adjusts the application audio volume.
Each touch of [+] or [–] increases or
decreases the volume level.
p The AV operation screen and the
Application screen can be switched by
pressing the MODE button.
p The right tab is not displayed on the AV
operation screen.
p You cannot adjust the volume of the main
sound on the screen. Press the VOL
(+/–) button to adjust the volume of the
main sound.
p The audio mix menu is displayed for four
seconds. If the screen disappears, press
the VOL (+/–) button again. The screen
reappears.
Using a Bluetooth
audio player
You can control a Bluetooth audio player.
p Before using the Bluetooth audio player,
you must register and connect the device
to this product.
For details, refer to Registering your
Bluetooth devices on page 12.
p Operations may vary depending on the
Bluetooth audio player.
p Depending on the Bluetooth audio player
connected to this product, the available
operations with this product may be
limited to the following two levels:
— A2DP (Advanced Audio Distribution
Profile): Only playing back songs on your
audio player is possible.
— A2DP and AVRCP (Audio/Video Remote
Control Profile): Playing back, pausing,
selecting songs, etc., are possible.
p Since a number of Bluetooth audio play-
ers are available on the market, opera-
tions with your Bluetooth audio player
using this product vary considerably in
range. Please refer to the instruction
manual that came with your Bluetooth
audio player as well as this manual while
operating your player on this product.
p While you are listening to songs on your
Bluetooth audio player, please refrain
from operating your cellular phone as
much as possible. If you try operating
your cellular phone, the signal may cause
noise for song playback.