GMC chervolet camaro 1999 Service Manual page 260

Steering
8. Remove outlet hose from reservoir ( LS1 with
cooler shown, remote-mount .reservoir on L36).
Important: If vehicle is equipped with a power steering
cooler (LS1 only), outlet hose and cooler hose (if
replacing) must be removed from the power steering
cooler as the cooler is installed in the outlet hose
(return back to reservoir).
Installation Procedure
1. Install outlet hose to reservoir ( LS1 with cooler
shown, remote-mount reservoir on L36).
(Pump mounted on LS1, body mounted on L36)
Important: Inlet and outlet hoses must be oriented so
as adequate clearance is maintained between both
hoses and surrounding components to prevent chafing.
Use minimum clearance of 12 mm (.47 inch).
The outlet hose must not be twisted during installation.
Do not bend or distort inlet and outlet hoses to
make installation easier. Failure to follow these
procedures could result in component damage.
Power Steering System 2-29
354416
1
354416