Customizing The Hot Keys; Adjusting The Display Color; Adjusting The Backlight - BenQ SW27 series User Manual

Customizing the hot keys

The left 3 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions for
these keys.
1. Press any of the control keys to bring up the hot key menu, and press
the main menu.
2. Go to
System
3. Select the custom key you want to change.
4. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.

Adjusting the display color

To adjust the display color, you can do one of the following:
• Apply the standard color settings from
• Change the display and color settings manually from the OSD menu. Settings you might want
to change are:
- Color Temp. (see page 41)
- Gamma (see page 42)
- Color Gamut (see page 42)
- Hue (see page 42)
- Saturation (see page 42)
- Black Level (see page 42)
Depending on the Color Mode you just set, the available options for color adjustment may vary.
See Available menu options for each Color Mode on page 43
Once the adjustment is done, you can save the customized settings from Color Adjustment >
Save Color Settings.
• Use a colorimeter (purchased separately) to work with the provided software named
and optimize the display color. The calibration result will be saved under
Master
>
Adjustment
How-to-Use Guide
To apply the calibrated result, go to
Calibration 2

Adjusting the backlight

To adjust the backlight of the monitor, you can change the backlight manually from
>
Adjustment
36 How to adjust your monitor
.
>
Color Mode Calibration 1
(available from www.benq.com) for more information.
.
. See Brightness on page 41
Brightness
Color Adjustment
or
Calibration 2
>
Color Adjustment
for more information.
(
Menu
> .
Color Mode
for more information.
. See the
Palette Master
>
Color Mode Calibration 1
) to access
Palette
Color
or
Color