BenQ SW27 series User Manual page 13

To Connect the DP Cable
Connect the plug of the DP cable to the monitor video
socket. Connect the other end of the cable to the
computer video socket.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
3. Connect the OSD Controller to the
monitor.
Connect the OSD Controller to the mini USB port
(exclusively for OSD Controller connection) on the
rear of the monitor.
And place the OSD Controller properly on your
monitor base.
For more information on OSD Controller, see
Controller on page
4. Connect the headphones.
You may connect headphones to the headphone jack
found on the back side of the monitor.
32.
OSD
Or
How to assemble your monitor hardware 13