BenQ SW27 series User Manual page 11

Turn the base counterclockwise until you cannot go
further.
Raise the thumbscrew lid (
thumbscrew as illustrated (
Carefully put down the stand and the base.
Gently attempt to pull the stand and the base back apart
to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the
bottom of the stand base at the same time as illustrated.
) and tighten the
). Then push the lid back.
2
How to assemble your monitor hardware
1
Lock
11