Clock Functions - AEG Electrolux U88106 User Manual

Clock Functions

1 Time
2 Cook time
3 End time
4 Countdown
5 Clock Functions button
6 Selection button (Plus)
7 Selection button (Minus)
Countdown
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
Cook time
To set how long the oven is to be in use.
End time
To set when the oven is to switch off again.
Time
To set, change or check the time (See also section "Before Using for the First Time").
How to use the clock functions
• After a clock function has been selected, the corresponding function flashes for about
5 seconds. During this period, the desired times can be set or modified using the
button.
• When the desired time has been set, the function continues to flash for approx. 5 seconds.
After that the function is then lit. The set time begins to run.
• With Countdown the oven must also be switched on in order to set the clock function.
• By pressing
Checking the time set or remaining Press the Selection button repeatedly, until the ap-
propriate clock function flashes and the time set or remaining is displayed.
7
and at the same time, the time set can be reset.
1 2 3 4
6 5
13
Operation
or