Cookware; Setting The Time - AEG Electrolux U88106 User Manual

normal use. Children should be kept away. During this period an odor may be emitted, it is
therefore advisable to open a window for ventilation.
The cooling fan
The cooling fan comes on immediately the top oven or grill is switched on. It may run on
after the ovens are switched off until the appliance has cooled. During the cooling down
period the cooling fan may switch on and off.
WARNING!
Always allow the cooling fan to cool the appliance down before switching off the electrical
supply to carry out cleaning or maintenance.
Control panel indicator neon(s)
The indicator neon will operate when the oven(s) is switched on. The indicator neon will
glow. It may turn on and off during use to show that the setting is being maintained. If the
neon does not operate as the instructions indicate the controls have been incorrectly set.
Return all controls to zero and reset following the instructions for the required setting.
Condensation and steam
When food is heated it produces steam similar to a boiling kettle. The vents allow some of
this steam to escape. However, always stand back from the appliance when opening the
door(s) to allow any build up of steam or heat to release.
If the steam comes into contact with a cool surface on the outside of the appliance, e.g. a
trim, it will condense and produce water droplets. This is quite normal and is not caused
by a fault on the appliance.
To prevent discoloration, regularly wipe away condensation and foodstuff from surfaces.
For your safety wall coverings at the rear of the appliance should be securely fixed to the
wall.

Cookware

Baking trays, dishes etc., should not be placed directly against the grid covering the fan at
the back of the oven.
Do not use baking trays larger than 30cm x 35cm (12" x 14") as they will restrict the
circulation of heat and may affect performance.

Setting the Time

The oven only operates when the time has been set.
1. When the appliance is connected to the elec-
trical supply or when there has been a power
cut, Time
2. Using the
time.
3. After approx. 5 seconds, the clock stops flash-
ing and the clock displays the time of day set.
The appliance is now ready to use.
flashes automatically.
or button, set the current
Before first use
7