Sony Bravia KLV-40ZX1 Operating Instructions Manual page 9

4: Preventing the monitor
from toppling over (only
when placing on a TV stand)
1
Remove the screw from the Table-Top
Stand.
2
Secure the Stand Support adaptor to the
Table-Top Stand.
3
Attach a rope or chain to the adaptor, and
then secure it to the TV stand (not
supplied). Make sure that there is no
excess slack in the rope or chain.
Install a wood screw (4 mm in diameter, not
1
supplied) in the TV stand.
Install a machine screw (M6 × 12-15, not
2
supplied) into the screw hole of the monitor.
Tie the wood screw and the machine screw
3
with a strong cord.
9
GB