Sony Bravia KLV-40ZX1 Operating Instructions Manual page 42

Monitor Set-up
Power Saving
Light Sensor
Product Information
Remote Control Set-
up
Wireless Set-up
Language
PC Settings
Wide Mode
Reset
Horizontal Shift
Vertical Shift
42
GB
Reduces the power consumption by adjusting the backlight brightness. This also
enhances the black level. Select from "Off", "Low", "High" and "Picture Off".
On Automatically optimises the picture settings according to the
ambient light in the room.
Off
Turns off the "Light Sensor" feature.
~
• Be sure not to put anything over the sensor, as its function may be affected. See
page 22 for the location of the light sensor.
• Depending on the "Picture Mode" and "Power Saving" settings, the effect of
"Light Sensor" may vary.
Displays your monitor's product information.
Registers a remote to the unit, otherwise the remote cannot be used with the unit.
Instruction screens appear if you register or delete a remote. Follow the
instructions to register or delete.
~
• The remote can only be registered to only one unit.
• When registering a remote, move the remote as close as possible to the bottom
right of the monitor front.
Change Rate Adjusts signal transmission rate according to the signal
quality in your home. Select from "High", "Medium", or
"Low".
Buffer Time
Selects the buffering time from "Short", "Medium", or
"Long". When set to "Short", operation speed increases.
When set to "Long", communication becomes more stable.
Wireless Displays information about the current wireless channel and
Information
link level.
~
• If the link level (6 stages) is low, change the installation position or situation to
increase the link level.
Selects the language in which the menus are displayed.
Selects "Wide Mode" for displaying input from your PC.
Normal Displays the picture in its original size.
Full 1
Enlarges the picture to fill the vertical display area, keeping
its original horizontal-to-vertical aspect ratio.
Full 2 Enlarges the picture to fill the display area.
Resets the PC screen settings to the factory settings.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.