Sony Bravia KLV-40ZX1 Operating Instructions Manual page 35

Channel Set-up
1 Digit Direct
Favourite Set-up
Auto Tuning
Programme Sorting
Programme Block
Intelligent Picture
Manual Programme
Preset
Select "On" to select a channel using one preset number button (0 – 9) on the
remote.
~
• When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and
above entering two digits using the remote.
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select "– –".
Tunes in all the available channels.
This option allows you to retune the unit after moving house, or to search for new
channels that have been launched by broadcasters.
Changes the order in which the channels are stored on the unit.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for your channel, then press
Blocks an individual channel from being watched.
1
Press F/f to select the channel you want to block, then press
2
Press F/f to select "Block", then press
"Allow".
On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On Automatically reduces the picture noise.
Off Turns off the "Intelligent Picture" feature.
Before selecting "Label"/"AFT"/"Signal Booster"/"Audio Filter"/"Skip"/"Colour
System", press PROG +/– to select the programme number with the channel. You
cannot select a programme number that is set to "Skip" (page 33).
Programme/
Presets programme channels manually.
TV System/ 1
Frequency
2
3
4
5
6
Label
Assigns a name of your choice, up to five letters or numbers,
to the selected channel. This name will be displayed briefly
on the screen when the channel is selected.
To input characters, follow steps 1 to 3 of "Edit:" (page 33).
AFT Allows you to fine-tune the selected programme number
manually if you feel that a slight tuning adjustment will
improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15.
When "On" is selected, the fine tuning is performed
automatically.
. To watch the channel, select
Press F/f to select "Programme", then press
Press F/f to select the programme number you want to
manually tune (if tuning a VCR, select programme 0),
then press .
Press F/f to select "TV System", then press
Press F/f to select the best received TV broadcast
systems, then press .
Press F/f to select "Frequency", then press
Press G/g to search for the next available channel. The
frequency band ("VHF Low", "VHF High" or "UHF")
is changed accordingly.
.
.
.
.
.
35
(Continued)
GB