Position Reports - Garmin GTN 625 Cockpit Reference Manual

Adding Channels to Presets
1. Touch the Presets key. The choices are XM1, XM2, and XM3.
2. Touch the Channel key and enter in the desired channel.
3. Touch and hold the key of the preset where you want to store the channel
for three seconds. The key in the Preset Channel Bar will store the
channel.
4. Follow the same steps to override a currently stored channel. To clear
presets, change Channel to 0 and touch all presets until all read 0.

Position Reports

Touch to activate
automatic
reporting.
Position Reporting
1. Touch the Position Reports key.
2. Touch the Automatic Reporting key to enable reporting of position
automatically.
3. After automatic reporting is enabled, touch the Report Period key to
display the keypad and enter the frequency of reporting.
4. Touch the Enter key to confirm your selection.
34
Status Window
Touch to enter frequency of
reporting. Range is 2 to 60
minutes.
Position Reports Page
GTN 625/635/650 Cockpit Reference Guide (CRG)
Touch to
send position
report.
190-01004-04 Rev. G