Understanding Distress Calls; Understanding Position Reports; Receiving Dsc Calls - Garmin GPSMAP 496 - Aviation GPS Receiver Owner's Manual

M M P f
ArIne ode Ages And eAtures

Understanding Distress Calls

When the GPSMAP 496 receives a distress call from a connected
DSC enabled VHF radio, an alert message and notification page
appear, and an alarm tone sounds. Distress calls are shown in the
DSC Call List, and Log with a checkered symbol.
You also have the ability to input a caller's name, if it is known.
The caller's name replaces the MMSI number as a reference when
entered.

Understanding Position Reports

A position report is similar to a distress call except no alarm is
sounded. Position reports are not broadcast to all DSC users and are
shown with a boat symbol.

Receiving DSC Calls

Each time you receive a distress call or position report, a
Notification page appears, and the call is placed in the DSC Call
List and Log. The Notification page contains information about the
call including: the type of call (distress or position report), he MMSI
number of the caller, a user definable name, the time and date of the
call, the bearing and distance from your current position, and
92
> dsc
the coordinates of the caller. To see the caller's location on a map,
select the Show Map button. To create a waypoint at the caller's
location, select the Create Wpt button. To close the Notification
page, press the QUit key.
When a distress call or position report is placed in the Call List and
Log, the information on the Notification page is retained. To review
a DSC call or log entry, highlight the entry and press EntEr. The
DSC Entry Review page is identical to the Notification page with
one exception, the entry can be deleted.
To review a call or log entry:
1. Open the Call List or Log from the DSC tab.
2. Press up or down on the ROCKER to highlight the call you
want to review.
3. Press ENTER to open the DSC Entry Review Page.
DSC Entry Review Page
GPSMAP 496 Owner's Manual