Planet VC-201A User Manual page 24

Internet
Figure 3-3: VC-202A LAN to LAN connection
3.1.2 VC-201A / VC-204 Connect to Multi-Port Master
To built up a local Internet in apartment, hotel, campus and
hospitality environment.
The Multi-port Master (for example, VC-820M VDSL2 Switch)
need to be placed in the wiring center (MDF room) and connect
to the telephone line system, on the other hand, need to install
a Slave (VC-201A / VC-204 CPE) converter on the individual
client side and connect to the Multi-port Master through the
telephone lines.
When deciding where to put the converter then you must
ensure:
It is accessible and cables can be connected easily.
l
Cabling is away from sources of electrical noise such as
l
radios, transmitters and power lines and fluorescent lighting
fixtures.
Water or moisture can not enter the Converter.
l
Air flow around the unit and through the vents in the side
l
of the case is not restricted (company recommend that you
provide a minimum of 25mm inch clearance)
To prolong the operational life of your units:
Do not place objects on top of any unit or stack
l
24
Router
VDSL2 CO Converter
Switch
VDSL2
VDSL2 CPE Converter
Coaxial Cable
VDSL2
Up to 3.0km
100Base-TX UTP
VDSL2 Coaxial Cable