3.1.1 VC-201A / VC-202A / VC-204 LAN to LAN connection
Two sets of the Ethernet over VDSL2 Converters could be used
to link two local Area networks that are located in different
place. Through the normal telephone line, it could setup a
100/55Mbps asymmetric backbone, but one Ethernet over
VDSL2 Converter must be Master (CO mode) and the other one
is Slave (CPE mode).
Internet
Switch
PSTN
Figure 3-1: VC-201A LAN to LAN connection
Internet
PSTN
Figure 3-2: VC-204 LAN to LAN connection
Router
VDSL2 CO Converter
PBX
Router
VDSL2 CO Converter
Up to 1.6km
PBX
VDSL2 CPE Converter
Up to 1.6km
100Base-TX UTP
Telephone wire
100Base-TX UTP
Telephone wire
VDSL2 CPE Converter
Phone
Phone
23