User Account Screen - ZyXEL Communications WAH7706 User Manual

Figure 43 System > System Information
The following table describes the labels in this screen.
Table 38 System > System Information
LABEL
About the 4G Hotspot
Firmware
Version
IMEI
Hardware
Version
Wi-Fi1 MAC
Address
Wi-Fi2 MAC
Address
Reboot Device
Reboot Device

8.3 User Account Screen

This screen allows you to set the domain name and change the WAH7706's system password. It is
strongly recommended that you change your WAH7706's system password. To access this screen,
click System > User Account.
See Section 2.2 on page 12
Chapter 8 System
DESCRIPTION
This displays the current firmware version of the WAH7706.
This displays the International Mobile Equipment Number (IMEI) which is the serial number
of the built-in 3G module. IMEI is a unique 15-digit number used to identify a mobile device.
This displays the hardware version of the WAH7706.
This is the MAC address of the wireless network.
Click Reboot to restart the device. Wait a few minutes until the login screen appears. If the
login screen does not appear, type the IP address of the device in your Web browser.
for more information about login accounts.
WAH7706 User's Guide
68