AT&T SL81108 User Manual page 32

Telephone operation
Intercom
To end the intercom call:
• Press OFF
/CLEAR
-OR-
• Place either handset in the charger or telephone
base.
NOTES:
1. Before the intercom call is answered, you can cancel the
intercom call by pressing
handset.
2. If the called handset is not answered within 100 seconds, or
if it is in the directory or caller ID history mode, or on a call,
or out of range, the calling handset will show the message
UNABLE TO CALL TRY AGAIN.
3. Pressing OFF/
the intercom ringer.
4. You can buy additional accessory handsets, (SL80108). If
there are a total of two handsets registered to the telephone
base, the intercom feature will be the same as that of model
SL81208. If there are more than two handsets registered to
the telephone base, the intercom feature will be the same as
that of Intercom with three or more registered handsets.
If you want to intercom with the handset 10, 11 or 12, enter
the handset number as *0, *1 or *2 respectively on the call-
ing handset.
29
or INT on either handset.
OFF/CLEAR or INT on the calling
or MUTE will temporarily silence
CLEAR DELETE/