Getting started
Mounting bracket procedure
Desktop to wall mount installation
3. Position your hands as shown in Figure 3. Press your thumbs down on the tabs
that are below the bracket, holding it in place. Use your index fingers to move
the bracket towards yourself.
4. Tilt the top of the bracket away from you until it is resting on the telephone
base.
5. Align the grooves of the bracket with the upper keeper tabs on the telephone
base. Make sure the cords are pointing towards you as shown in Figure 4.
Upper keeper tabs
Figure 3. Detaching the bracket from the telephone base
Figure 4. Upper keeper tab location
11