Blower Function - Morphy Richards Boxer wet & dry vacuum cleaner Instructions Manual

Boxer wet & dry vacuum cleaner with blower function

Table of Contents

Emptying tank/replacing

paper bag

1 Switch the unit OFF and disconnect from

the mains.

2 Release the tank latches B and lift off the

upper body.

3 Option 1 No bag fitted, empty rinse and

dry the tank.

Option 2 Bag fitted, remove the full bag

and replace it with a new bag G.

4 Check condition of filter and clean if

necessary.

5 Refit upper body.

Blower function

The cleaner can be used as a powerful

blower by inserting the hose into the outlet

elbow Í on the upper body of the cleaner. I

• Always ensure that the hose, tank and

accessories have been cleaned of any

debris before operating the blower

function.

• Uses include: blowing leaves into piles,

blower out dust from difficult to get areas,

faster drying of paint.

• The blower must not be directed towards

people.

Storage

When not in use, the cable can be stored

by wrapping it around the cord hook Ì

positioned on the upper body. Hook the end

of the cable into the slot provided on the

cable hook. J

• The extension tubes and nozzle can be

stored in the designated areas on top of

the cleaner.

• The hose can also be stored by wrapping

it around the extension tubes.

Table of Contents

Ib70230