Display Screens; Screen Arrangement; System Overview Screens; Ups Start-Up Screens Sequence - Toshiba 1600EP SERIES Instruction Manual

Display Screens

Screen Arrangement

The display screens are organized into three groups that can be cyclically selectable by pressing the
"SELECT" key. The groups are:

1 System Overview Screens

2 Data Display Screens
3 Data Settings Screens
System Overview Screens
The System Overview Screens provide a summary of the current operational state of the UPS. Only one
of the several possible overview screens is available at any moment. The current screen is automatically
determined based upon the UPS state.

UPS Start-Up Screens Sequence

The Start-Up Screens consist of a series of automatically sequencing 'System Overview Screens'. These
screens notify operator of steps taken by UPS during its initialization. The sequence of Start-Up screens
begins when AC input power is detected at UPS input.
If the correct AC input power is available and no abnormal operating conditions are present then the
following system message will be displayed on the LCD screen.
Next, the LCD will report the current date and time. If necessary, the proper date and time can be set from
the 'Data Settings Screens'
depicted in the following example:
Next, the LCD will report the current UPS Operational Mode and the current percentage of the maximum
UPS capacity being supplied. Initially, the UPS is in bypass mode, and the following screen will appear:
34
SCREEN ARRANGEMENT GROUPS
Provides operational status summary
Provides detailed UPS data monitoring
Provides system confi guration
TOSHIBA 1600 UPS
INITIALIZING...
(see pages 38 and 41 for details).
11/04/2001(WED)
15.:22:47
BYPASS OPERATION
LOAD###%
NOTE: If input voltage is removed while UPS is in the
Bypass Mode then the output stops.
The date and time appear using the format
1600EP Series Instruction Manual