Toshiba 1600EP SERIES Instruction Manual page 21

Capacity
Environment
Operating Temperature
(15 – 25° C recommended)
Storage Temperature
Installation Area
Operating Humidity
Altitude
Acoustical Noise
Heat Generation
Operation Diagnosis
Battery Check
Input OV Protection
Battery +-
Internal Temperature
Event Data Storage
Applications
Switches
Bypass Switch
Bypass Disable
Automatic Retransfer
User Interface
Real Time Clock
Schedule Operation
RUN/STOP Disable
Autostart
Remote ON/OFF
LED Display
LCD Screen
UPS Operation: 6 Keys
Buzzer Volume
Power Connections
Emergency Power Off
Remote Contacts
RS232 ASCII Interface
1600EP Series Instruction Manual
STANDARD MODELS: 3.6kVA; 6kVA; 8kVA (CONT'D)
3.6kVA (3.1kW)*
0 – 40 °C
To be installed in a well ventilated area free of airborne dust,
metal particles or fl ammable gas, allow at least 4 inches on all sides.
50 dB (A) maximum @ 1 meter from front panel
1588 BTU/Hr
Performed on start up, by schedule, on-demand (user confi gurable)
UPS calculates battery replacement time
based upon battery ambient temperature (LCD display, LED and
UPS gives indication of internal temperature, alarm when high temp
64-Supply Mode, 32-Back up, 16- Faults
Static switch <1/4 cycle (50Hz:5ms/60Hz:4.16ms)
Factory or authorized service center selectable only
Provided (can be disabled from front panel)
Standard, Minimum 3 days memory backup during power loss
Schedule ON/OFF operation of UPS using communication software
UPS has option for UPS to start automatically when AC is applied
4 LED's indicating input/output condition, warning and battery
Run/Stop, Set/Monitor, Shift/Select,
Low, High, Mute; Selectable by keypad
Standard (Terminal contacts only)
Standard (INV, BYP, BATT, LB, AC, FLT)
6kVA (5.1kW)*
60Hz
-20 – 40 °C (-4 to 104 °F)
30 – 90% (no condensation)
< 1000 m above sea level****
2610 BTU/Hr
Standard
beeps)
Generator compatible
Standard, external terminal
operation
16 characters x 2 lines
Del/Page
Hard wire (Standard)
Standard
8kVA (6.8kW)*
50Hz
0 – 33 °C
3482 BTU/Hr
Down, Reset/Page Up
21