Sequential Polling - Brother MFC-J6920DW Advanced User's Manual

Chapter 4
Setup to receive delayed polling
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b
Press Options.
c
Swipe up or down, or press a or b to
display Polling RX.
d
Press Polling RX.
e
Press Timer.
f
Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
g
Enter the fax number you are polling by
either using Address Book or the dial
pad on the Touchpanel.
h
Press Fax Start.
The machine makes the polling call at
the time you entered.
28

Sequential polling

4
(Monochrome only)
Sequential polling lets you request
documents from several fax machines in one
operation.
a
Do one of the following:
 When Fax Preview is set to Off,
press
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b
Press Options.
c
Swipe up or down, or press a or b to
display Polling RX.
d
Press Polling RX.
e
Press Standard, Secure or Timer.
f
Do one of the following:
 If you chose Standard, go to
step g.
 If you chose Secure, enter a four-
digit number, press OK, go to step g.
 If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step g.
g
Press Options. Swipe up or down, or
press a or b to display Broadcasting.
h
Press Broadcasting.
i
Press Add Number.
(Fax).
4