Slide Show - Brother MFC-J6920DW Advanced User's Manual

Chapter 8
h
Confirm the image displayed on the
Touchscreen.
Rotate the image if necessary by
pressing .
NOTE
The trimming function is not available.
i
Press OK.
j
Do one of the following:
 Press Print Settings to change
the print settings. Go to step k.
 If you do not want to change any
settings, press Start to print.
k
Do one of the following:
 To change the print quality, press
Print Quality.
Press Normal or Photo.
To change the paper type, press

Paper Type.
Press Plain Paper,
Inkjet Paper, Brother BP71 or
Other Glossy that you want to set.
 To change the paper size, press
Paper Size.
Press 10x15cm, 13x18cm, A4 or
Letter that you want to set.
 To add enhancement effects, press
Photo Enhance.
Press Auto Correct,
Remove Red-Eye,
Auto Correct & Remove Red-Eye
or Off that you want to set.
l
When you have finished changing
settings, press OK.
m
Press Start.
58

Slide Show

You can view all your photos on the
Touchscreen using Slide Show. You can
also choose a photo during the operation.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Swipe left or right to display
Slide Show.
e
Press Slide Show.
Press OK.
f
Do one of the following:
 If you want to change the length of
time the Touchscreen shows each
photo, press
Show Each Photo for.
Swipe up or down, or press a or b to
display 3Secs, 10Secs, 30Secs,
1Min or 5Mins, and then press the
option you want to set.
 If you want to change the effect,
press Effect.
Press Slide In, Fade In,
Zoom In or Off.
 If you do not want to change the
settings, press Start.
g
Press to finish Slide Show.
8