Sony IJ1001M User Manual page 6

Do not install in a closed area
Prohibited
If the module/controller is installed in a closed
area with no air-conditioning, heat may build
up inside the set and cause a fire.
Do not place the set in direct sunlight
Prohibited
or near a heater
Doing so can cause deformation, a breakdown,
or a fire. Pay extra attention when you place
the set near windows.
Do not install the set where excessive
Prohibited
oil smoke, steam, moisture or dust is
contained in the air
If the set is installed in such a place, it may
cause a fire or electric shock.
Wear insulating gloves and protection
Instruction
glasses during installation and
connection
Wear insulating gloves and protection glasses
during installation and connection of the set
to prevent electric shock or other injuries.
Do not allow water and/or foreign
No .wet
objects inside the module
Water or foreign objects inside the module can
cause a fire or electric shock.
Should this occur, however, turn off the
"POWER ON/OFF" switch on the controller to
shut down, and remove the power connector
from the POWER CONNECTOR terminal of the
module.
Do not open the set unnecessarily
Do .not .
disassemble
Opening and modifying the set can cause a
fire or electric shock.
. Caution
If you ignore any of the following instructions, it
can cause injury or damage to nearby products.
Do not cover the vent
Prohibited
If the vent is covered, heat may build up inside
the set and cause a fire.
ˎ Do not put the set in a poorly ventilated and ˎ
narrow space.
ˎ Remove any dust buildup in the vent. ˎ
ˎ Do not place the set upside down or ˎ
sideways.
ˎ Do not place on a shag carpet or bed. ˎ
ˎ Do not cover the vent with a cloth, etc.
ˎ
Install in a stable place
Instruction
If you install the set in an unstable place, such
as an unstable rack, it may fall and cause injury.
Do not install upside down or sideways. The
set may drop and cause injury.
Use the designated packaging
Instruction
materials for transportation
If you do not use the designated packaging
materials, the packaging material may be
damaged by vibration during transportation
and it may cause injury.
Install based on the designated way of
Instruction
installation
If you do not follow the designated way of
installation, the set may drop due to the
strength poverty and can cause injury.
Fix a rack to the floor
Instruction
If a rack falls by the weight of the set, it may
cause serious injury or death.
Safety Precautions
6