Charging
Charging voltage and current
Conduct charging by constant current and constant voltage within the specified rating of the module.
charging .voltage
57.6 V
CC/CV .charging .performance .curve
0
Notes
ˎ Charge the module by setting a charging voltage of 57.6 ±0.8V and a charging current of lower than 24 A with constant current and
ˎ
constant voltage. (Note that the maximum current is limited by the maximum current of the controller.)
ˎ Discharge a module at lower than 50A. (Note that the maximum current is limited by the maximum current of the controller.)
ˎ
ˎ The controller stops discharging when it reaches the minimum voltage.
ˎ
ˎ Charging current may be shut down by the controller when charging is almost finished.
ˎ
constant .voltage .(CV)
24 A
constant .current .(CC)
charging .current
20