Using The Display Function; Temperature Selection - Morphy Richards 28034 Operating Instructions Manual

At the end of the preset time, the buzzer will sound and the timer icon
Press TIMER button to switch off the buzzer.

Using the display function

1 When the radio is on, each press of the DISPLAY button will display the following
in turn:
LCD display frequency clock + date
clock + temperature clock + second
2 In standby mode (with timer not set), each press of the DISPLAY button will
display the following in turn:
LCD display clock + date year + date
clock + temperature clock + second
3 In standby mode (with timer set), each press of the DISPLAY button will display
the following in turn:
clock + date year + date
clock + temperature clock + second
If you don't press the DISPLAY key continuously, LCD will display the current
select state.

Temperature selection

1 Repeatedly press the MODE button, until the LCD display is showing clock and
temperature, press the DISPLAY button whilst the temperature is flashing, LCD
display will alternate between Fahrenheit (
you don't press any key for 15 seconds, LCD will keep the current status and
the temperature will stop flashing.
Every 15 seconds the clock radio will test the temperature and update the indoor
temperature automatically.
year + date alarm 1
alarm 1 alarm 2
alarm 1 alarm 2
timer
F) mode and Centigrade (
o
9
will flash.
alarm 2
C) mode. If
o