Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Morphy Richards 28026
Summary of Contents for Morphy Richards 28026
- Page 1 MSF clock radio with pillow speaker 28026 OPERATING INSTRUCTIONS...
-
Page 2: Locations Of Control
16 Sleep ON button Attention Due to your clock radio operating by high precision software; an automatic reset circuit is built in. In case of a software hang-up (ie. no display after power failure) please unplug your unit from the mains and remove the back-up batteries, wait a few minutes for the unit to discharge power completely. -
Page 3: Lcd Display Format
Sleep indicator Electrical requirements Check that the voltage on the rating plate of your clock radio corresponds with your house electricity supply which must be A.C. (Alternating current). For clock radios with fitted plug. If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. - Page 4 Press the mode button (8) 6 times. The unit will be at world time setting mode. Choose the city you want to review, e.g. LAX Los Angeles. Press the Snooze button (7) once. The DST symbol will appear. One hour will be added onto the world time. Please note that this action will only affect that particular time zone, i.e.
- Page 5 If the RC signal has not been received and decoded successfully Your unit will stay in “0:00” with all the symbols cleared and will stop receiving the RC signal after 15 minutes. Press the mode button (8) once to switch the unit into self quartz oscillation Auto Run Mode.
- Page 6 View your clock functions with mode button Your clock is designed to view its varied functions by pressing mode button (8) Please see below chart for reference: Auto run (real time) mode Review the world time NOTE: When no button has been pressed for 15 seconds and is not in auto run mode your unit will switch back into auto run mode automatically.
-
Page 7: Setting The World Time
Reviewing / setting the alarm 1 and alarm 2 To review/set the alarm 1 time by pressing the mode button (8) three times and the previous alarm setting will appear (the time and week days will be flashing). Press the alarm (on/off) button (9) to enable/disable alarm. The alarm enable symbol Press the weekend alarm (on/off) button (7) to enable/disable the weekend alarm off function (5 of the weekday indicators Mo-Fr) will appear when the... - Page 8 Press the forward button (14) or backward button (15) to change the setting by 1 zone per step. Press the snooze button (7) to enable (or disable) the daylight saving function. When daylight saving is enabled the Press mode button (8) once to return to the auto run mode with the current setting confirmed or if no key is pressed for 15 seconds, the unit will return to the auto run mode automatically with the current setting confirmed as valid.
-
Page 9: Radio Operation
Radio operation To turn the radio on, slide the function switch (4) to the on position. Slide the band selector (11) to your desired waveband FM or MW. Adjust the volume control (12) to the desired level. Turn the tuning knob (10) to select your desired station. To turn off the radio, slide the function switch (4) to off position. -
Page 10: Maintenance
Maintenance Do not expose your clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish. - Page 11 Reference 2 World city name with abbreviation Time diff 0.00 +1.00 +2.00 +3.00 +4.00 +5.00 +6.00 +7.00 +8.00 +9.00 +10.00 +11.00 Reference 3 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 -12 -11 -10 -9 -8 Chicago Vancouver Los Angeles...
- Page 12 TWO YEARS from date of purchase. If your product proves to be defective within 28 days of purchase, your Morphy Richards dealer from whom the product was purchased will be pleased to replace it free of charge.