Table of Contents
Advertisement
Extends the line to the left and
right from the current center
point of the distance guideline.
The adjustment points on the
lateral coordinates at both ends
will also move.
Shortens the line from the left
and right to the current center
point of the distance guideline.
The adjustment points on the
lateral coordinates at both ends
will also move.
Resets the settings of the dis-
tance and vehicle width guide-
Default
lines and adjustment points to
the default.
p When a point is moved, the distance from
the initial value is displayed at the bottom
of the screen.
Setting the safe mode
For safety reasons, you can limit the func-
tions that are available while your vehicle is
in motion.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Safe Mode] repeatedly until
the desired setting appears.
On (default):
Activates the safe mode function.
Off:
Deactivates the safe mode function.
Turning off the demo screen
If the demo screen appears, perform the
following procedure to turn off the demo
screen.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Demo Mode] repeatedly
until the desired setting appears.
Off (default):
Hides the demo screen.
On:
Displays the demo screen.
You can also turn off the demo screen by
pressing and holding the MUTE button.
Selecting the system
language
The system language can be selected.
The language can be changed for the
following:
— The "Audio" screen
— The "System" screen
— The "Video Setup" screen
— The "Bluetooth" screen
— Language for messages
Some operations on this product are pro-
hibited from use while driving or require
careful attention when operated. In such
cases, a caution message will appear on
the display. You can change the language
for caution messages with this setting.
If the embedded language and the
selected language setting are not the
same, text information may not display
properly.
Some characters may not be displayed
properly.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [System Language].
The pop-up menu appears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the keyboard lan-
guage with the application
for iPhone
You can use the keyboard in AppRadio
Mode by setting the language of the key-
board for iPhone.
p This function is only available in
AppRadio Mode on the iPhone.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Keyboard].
The pop-up menu appears.
4 Touch the desired language.
After the language is selected, the previous
screen returns.
Setting the beep sound
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Beep Tone] repeatedly until
the desired setting appears.
On (default):
Sounds a beep.
Off:
Does not sound a beep.
Adjusting the response
positions of the touch panel
(touch panel calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response
positions of the touch panel screen.
p This setting is available only when you
stop your vehicle in a safe place and apply
the parking brake.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
p Do not turn off the engine while saving
the adjusted position data.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Touch panel calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen
along the arrows, and then touch
the centers of two + marks at the
same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
Proceed to 16-point adjustment.
If you press and hold the HOME button,
the adjustment is canceled.
7 Gently touch the center of the +
mark displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted
position data is saved.
If you press the HOME button, the previ-
ous adjustment position returns.
Chapter
19
43
En
Advertisement
Table of Contents
