Table of Contents
Advertisement
When the Setup/Application CD is for several scanner models
a.
Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the AutoPlay window.
b.
Click on the Yes button if the User Account Control dialog pops up. Follow the
instructions in the pop-up installation message.
c.
In the Device Manager window, right-click on this scanner under Other
devices and select Update Driver Software from the pop-up menu. Click
Browse my computer for driver software in the window that appears, and
click the Browse button.
d.
In the Browse For Folder window, select the folder or the CD-ROM drive that
contains this scanner's driver and click the OK button to return to the previous
screen. Click the Next button and click Install this driver software anyway if
the Windows Security window appears. Afterwards, please skip to procedure
9.
When the Setup/Application CD is for one scanner model
a.
Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the AutoPlay window.
b.
Click on the Yes button if the User Account Control dialog pops up. If the pop-
up wizard window appears click Next, and click Install this driver software
anyway in the Windows Security window then click Finish in the wizard
window. Afterwards, please skip to procedure 9.
7. During the process of the installation, a message "Windows can't verify the
publisher of this driver software" might be prompted. Please ignore it, and click on
Install this driver software anyway to continue the installation without any
misgiving at your scanner functioning.
8. When the system completes the installation, click the Finish button.
9. Follow the on-screen instructions to install all software that your new scanner
requires.
10. After the software is installed, close all open applications and click the Finish
button to restart your computer.
Information
S
t
e
p
5
.
T
e
s
t
i
n
S
t
e
p
5
.
T
e
s
t
i
n
The following describes how you can check if the scanner is properly functioning
with your computer and the scanning software by performing your first scan with our
If the scanner installation is not started and
displayed automatically on the screen, click
Start, select Run and type in D:\Install (where
D: is the drive letter assigned to the CD-ROM
drive of your computer.)
g
t
h
e
S
c
a
n
n
e
r
g
t
h
e
S
c
a
n
n
e
r
13
Advertisement
Table of Contents
