Table of Contents
Advertisement
2. Load the documents, headfirst and face up, toward the center of the ADF input
tray and all the way into the ADF until touching the bottom.
3. Adjust the paper width slider for the paper size you are using. The paper width
slider should be gently touching both sides of the documents.
Attention
Paper scanned from the ADF must be a
minimum of 90 x 114 mm (3.55 x 4.5",
WxL).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in
so tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
19
Advertisement
Table of Contents
