Table of Contents
Advertisement
bundled application NewSoft Presto! PageManager.
double check to make sure that all connections are securely fastened.
To test the flatbed scanning:
1. Open the scanner's document cover. Place a document face down onto the
scanner glass and align the document top with the reference mark.
2. Gently close the document cover.
3. Click the Windows Start button to launch NewSoft Presto! PageManager.
4. (If you have only one scanner connected with your computer, please skip to
Step 5.)
If you have more than one scanner or other imaging device installed on your
computer: Click Select Source from the File menu of Presto! PageManager
and then choose this scanner as the default scanning source.
5. Within Presto! PageManager, click Tools > Scan Settings > uncheck
"Suppress TWAIN User Interface" > OK. Click File > Acquire Image Data.
6. In the TWAIN window that opens, select Flatbed Reflective as the Scan Type.
7. Click the Scan button.
8. If an image appears on your screen, your scanner is working properly.
To test the ADF scanning:
1. Load a single-page document face up into the ADF (for detailed instructions on
loading paper into the ADF, please refer to the "Placing Documents" section of
this guide.)
Before testing your scanner,
14
Advertisement
Table of Contents
