Anchor Watch - Furuno FAR-2807(-D) series Operator's Manual

1. RADAR OPERATION
1.52

Anchor Watch

The anchor watch feature alerts you when your ship has traveled a distance
greater than a threshold value, when it should be at rest. When the anchor
watch is active, an orange dashed circle marks the anchor watch range. If your
ship goes outside the circle, "ANCHOR WATCH" appears in the Alert Box.
1. Left-click the MENU box to open the menu.
2. Select 2 [MARK].
3. Select 5 ANCHOR WATCH.
4. Select ON.
5. Roll the scrollwheel to set the alarm range, from 0-9.99 (nm).
6. Push the right button to close the menu.
1-102
Alarm
setting
Your ship's position, where
you start the anchor watch.
: Alarm triggered