Monitor Unit - Furuno FAR-2807(-D) series Operator's Manual

FURUNO
FAR-2837SW
3

MONITOR UNIT

3.1 Screen
3.2 Display
Model
Size
Display area (mm)
Resolution (pixel)
Effective radar
diameter (mm)
Viewable range
(mm)
3.3 Minimum range
3.4 Range discrimination
3.5 Range scales (nm), Ring interval
Range (nm)
Ring interval (nm)
Number of rings
3.6 Range accuracy
3.7 Bearing discrimination
3.8 Bearing accuracy
3.9 Presentation mode
3.10 Target tracking (TT)
3.11 AIS
3.12 Radar map
3.13 Acquisition zone
3.14 Interwitch function
4. INTERFACE
4.1 Heading signal
4.2 Speed log
4.3 AIS
4.4 Input data sentences
Ferrite circulator with TR limiter
Raster scan, daylight bright, yellow or green echoes in 32 levels
FAR-21x7 series
MU-170C
17-inch color LCD
338 x 270
1280 x 1024
260
(H: 64 kHz; V: 60 Hz)
920
22 m
26 m
0.125 0.25 0.5 0.75
0.025 0.05 0.1 0.25
5 5 5
16 24 32
4 4 8
4 6 4
1% of the maximum range of the scale in use or 10m,
whichever is the greater
0.98° (XN5A), 2.1° (XN12AF), 1.5° (XN20AF), 1.2° (XN24AF),
2.0° (SN36AF)
±1°
Head-up, Cursor-gyro, North-up, Course-up,
True Motion (sea or ground stabilization)
Auto or Manual acquisition: 100 targets in 0.2-24(32) nm
Auto tracking on all acquired targets
Tracking: 5/10 pts on all target
Capacity: 1000 targets, Tracking: 10 pts on all target
Time of vector: Off/30s/1-60 minutes
20,000 pts in radar mode, 6000 pts on IC card in chart mode
2 zones
Selectable from menu
Synchro signal (20-100VDC or 20-135VAC 50/60/400/500Hz) or
Stepper signal (20-100VDC), built-in interface (option) required,
AD-10 format or IEC61162-2
IEC61162-1
IEC61162-2
ABK, ACK, ALR, BWC, BWR, DBK, DBS, DBT, DPT, DTM, GGA,
GLL, HDT, MTW, MWV, RMB, RMC, RTE, THS, VBW, VDM, VDO,
SP - 2
FAR-21x7 series
MU-201CR
20.1-inch color LCD,
399 x 319
1280 x 1024
308
(H: 64 kHz, V: 60 Hz)
1080
1 1.5
0.25 0.25 0.5
3 6 6
48 72 96 120
8 12 16 20
6 6 6 6
FAR-21x7/28x7 SERIES
FAR-28x7 series
MU-231CR
23.1-inch color LCD
470 x 353
1600 x 1200
340
(H: 75 kHz, V: 60 Hz)
1200
2 3 4 6 8
0.5 1 1 2
6 6 4 6 4
E3519S01N-M
12
2
6