Recording Data - Furuno FAR-2807(-D) series Operator's Manual

6. Select 0 NEXT.
7. Select 3 CARD INITIALIZE.
8. Select 2 INITIALIZE START to initialize the card. The LED near the card
flashes, the CARD menu disappears and the message "FORMAT CARD
DATA" appears.
5.12.2

Recording data

When the memory becomes full, the oldest track is erased to make room for the
latest. Further, when the memory is full you cannot enter another mark or line
unless you erase unnecessary marks, lines or track. Thus you should save
important data to a memory card so as not to lose important data.
1. Insert initialized memory card into appropriate drive in Card I/F Unit.
2. Left-click the MENU box to open the menu.
3. Select 6 [CARD].
[CARD (2/2)]
1 BACK
2 [FILE DELETE]
3 [CARD INITIALIZE]
CARD menu, page 2
[CARD INITIALIZE]
1 BACK
2 INITIALIZE START
NO/YES
CARD INITIALIZE menu
[CARD (1/2)]
1 BACK
2 DRIVE SELECT
A/B/C/D*
3 [READ CARD]
4 [WR MARK]
5 [WR NAV LINE•WPT]
6 [WR OWN TRACK]
7 [WR TARGET TRACK]**
8 [WR SETTING DATA]
9 [WR INSTALL DATA]
0 NEXT
CARD menu
5. VIDEO PLOTTER OPERATION
* Drives available are shown.
** Not available on IMO type
5-33