Power Convertible Top Operation; Uconnect™ Phone - Chrysler 2009 Sebring Convertible Quick Reference Manual

Power Convertible Top Operation

Before lowering the top, verify the cargo shield is perfectly
•
positioned in the trunk. Refer to Owner's Manual for
further details.
Do not place objects on the cargo shield. Objects placed on the
•
cargo shield will interfere with the top during lowering and
cause extensive damage.
the Power top switch will operate when the ignition switch is turned
•
to the on or aCC position and when in the power accessory delay.
LoWErIng
the Power top switch is located on the instrument panel to the left
•
of the steering column.
the Power top switch has two top down positions which affect
•
window position when lowering the top.
1. Press the switch down halfway to the first detent position to
lower the top and maintain the current window positions.
2. Press the switch fully down to the second detent position to
lower the top and completely lower all four windows.
raISIng
Press and hold the switch in the top up position until the operation
•
of raising the top and latching is complete. "toP donE" will be
displayed in the odometer or "ConVErtIbLE toP CoMPLEtE" in
Electronic Vehicle Information Center once the convertible top
is completely raised and latched. Continue to hold the switch in the up
position to completely raise all four windows.
ManUaL bYPaSS ModE
refer to owner's Manual for specific instructions regarding
•
this procedure.
uconnect
™
uconnect phone allows a cellular phone equipped with the
•
™
bluetooth Hands-Free Profile, Version 0.96 or higher. See the
®
www.chrysler.com/uconnect website for supported phones.
refer to your owner's Manual for further information.
note: You may experience decreased performance from the
•
voice-activation feature in the uconnect
with the Power top in the down position.
phone
system when operating
™