Removing and installing clutch
thrust bearing
•
Remove rear wheel.
•
Remove exhaust system.
•
Detach clutch cable at clutch release lever (1).
•
Loosen retaining clip (2) at sealing gaiter.
•
Remove gaiter (3) with spring (4).
•
Remove thrust bearing (5) with pointed-nose
pliers.
•
Install in the reverse order of removal.
e
Caution:
ABS rear wheel:
Check and, if necessary, adjust the sensor clear-
ance after installing the brake caliper.
Sensor distance:
Maximum distance
............................................... (0.2362...0.25559in)
21.12
Downloaded from
www.Manualslib.com
..........................0.60...0.65 mm
manuals search engine
2
5
4
3
1
LT210100