DieHard 315.259260 Operator's Manual page 5

Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, you should charge
them until the green LED on the front of the charger
comes on.
This product will charge DieHard
battery packs and DieHard
battery packs.
Use only these DieHard
charger:
LITHIUM-ION
130285003 130285006
NICKEL-CADMIUM
130235029 130251008
130238003 130279001
130238005 130279002
BATTERY GAUGE
See Figure 2.
To display the amount of charge left in the battery, press
and hold the battery gauge button.
 If the charge indicator light glows green, the battery
pack is fully charged.
 If it glows yellow, it has a usable charge remaining but
will soon require recharging.
 If it glows red, the battery requires recharging as
indicated by the battery gauge symbols on top of the
battery.
OPERATION
19.2 V lithium-ion
®
14.4 - 19.2 V nickel-cadmium
®
battery packs with this
®
130156001
130279003
130279004
130279005
BATTERY PROTECTION FEATURES
DieHard 19.2 V lithium-ion batteries are designed with
®
features that protect the lithium-ion cells and maximize
battery life. If the tool stops during use, release the trigger
to reset and resume operation. If the tool still does not
work, the battery needs to be recharged.
USABLE CHARGE
USE ONLY WITH
REMAINS BUT WILL
GREEN = 25926 CHARGER
FULL CHARGE
Battery Gauge
ON BOARD
ENERGY
INDICATOR
BATTERY
GAUGE
BUTTON
5
YELLOW =
SOON REQUIRE REQUIRES
RECHARGING
RECHARGING
RED =
Fig. 2