Telephone Base Indicator Lights; Handset Alert Tones; Telephone Base Alert Tones - AT&T EL52100 User Manual

Appendix
Screen icons, indicator lights and alert tones

Telephone base indicator lights

Handset alert tones

One short beep
(Key tone or playback
confirmation tone)
One long beep
(Recording or playback
confirmation tone)
Two short beeps
(Error tone)
Three short beeps
(Out-of-range or no-power-at-
base warning tone)
Three short high-pitched beeps
(Confirmation tone)
Four short beeps
(Low-battery warning tone)

Telephone base alert tones

One short beep
(Playback confirmation tone)
Beeps every 10 seconds
(Message alert tone)
One long beep
(Recording or playback
confirmation tone)
ANS ON/OFF light
On when the built-in answering system is on.
IN USE light
On when the handset is in use or when the answering system
is answering an incoming call or when the answering system
is being accessed remotely.
Flashes when another telephone on the same line is in use.
Flashes quickly when there is an incoming call.
A key is pressed.
Plays at the end of each message.
Start or end recording.
Plays at the end of all messages.
Command has failed.
You have reached the beginning or end of the list.
You have reached the minimum or maximum listening volume.
The handset is out of range or there is no power at the
telephone base.
The telephone has completed the command successfully.
Low battery warning.
Plays at the end of each message.
Message alert.
The answering system starts recording a message if call
screening is on.
Plays at the end of all messages.
52